Home » LED/OLED Products » Ophir Photonics unveils compact all-in-one LED luminaire measurement system

Ophir Photonics unveils compact all-in-one LED luminaire measurement system

Ophir Photonics unveils compact all-in-one LED luminaire measurement system

Sep 12, 2017: North Logan, UT – Ophir Photonics Group, a Newport Corporation company celebrating 40 years of excellence as the global leader in precision laser and LED measurement equipment, has announced the FluxGage, a compact, all-in-one LED luminaire measurement system. The patent-pending FluxGage measures flux, color, and flicker, important quantities for evaluating the performance of LED-based products. The measurement system is three times smaller and lower cost than equivalent integrating sphere products. It is designed for use by R&D during development and production for incoming inspection and quality control of new and replacement parts, allowing LED luminaires and modules to be sorted for consistency.

The FluxGage is an all-in-one photometric test system that uses 2π (two pi) geometry. A
spectrometer is incorporated for color measurement of the spectrum, CCT (correlated color
temperature), CRI (color rendering index), Duv, and chromaticity. There is also a fast
photodetector for flicker measurements. No fibers are needed.

Also Read: Ultra-pure, paper-thin green LEDs produced for more beautiful displays

The FluxGage system uses solar panels as the light detector. The panels are arranged on
the inside walls of the measurement cavity and are covered with black paint and a dense array of
clear pinholes through which the light passes. This design significantly reduces the reflectance of
the solar panels, enabling the system to be only slightly larger than the luminaire source under
test. It can measure luminaires of up to 610 x 450mm.

Integrated software simplifies set up and operation with all the optical data from the light
source displayed. The FluxGage connects to a PC via a USB cable. A calibrated, NIST-traceable
LED source is used to calibrate the system in the field.

Pin It

One comment

  1. A great all in one LED luminaire measurement system

Leave a Reply

Your email address will not be published. Required fields are marked *

*